Response SL5 Manual de instrucciones Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
47
FRIEDLAND SPECTRA PLUS
LIGHTING SETUP
Scroll through the menu until ‘7. SPECTRA
LIGHTING SETUP’ is displayed on the LCD and
press .
After configuring the Spectra Plus lighting press
to return to the top level programming menu.
SET LIGHT-ON PERIOD
This controls the time period for which any linked
Spectra lighting is switched on for following an
alarm condition.
Scroll through the system menu until ‘7.1 Lamp On
Time’ (and the current setting) is displayed.
To change the setting press .
Enter the required light-on period
(1 to 20 minutes).
Press to save the new setting, or
Press to exit without saving.
SET LIGHTING OPERATING MODE
This controls whether the Spectra Lighting is active
and if it operates on a 24 hours basis or is time
controlled. If time controlled it means that the user
can set the time in the morning after which an alarm
will no longer cause the lights to activate and the
time in the evening after which an alarm will allow
the lights to be activated again. This prevents the
lights from being triggered during the day.
Scroll through the system menu until ‘7.2 Spectra
Mode’ (and the current setting) is displayed.
To change the setting press .
Options: OFF / 24-Hour / Time-Controlled
Press to save the new setting, or
Press to exit without saving.
STOP TIME
This controls the time of day after which triggering
an alarm will no longer be able to activate the
Spectra Lighting.
Scroll through the system menu until ‘7.3 Stop Time’
(and the current setting) is displayed and press .
Enter the new time in the format ‘hh:mm’
using the 24 hour clock format.
Press to save the new setting, or
Press to exit without saving.
START TIME
This controls the time of day after which triggering
an alarm will be able to activate the Spectra Lighting.
Scroll through the system menu until ‘7.4 Start Time’
(and the current setting) is displayed and press .
Enter the new time in the format ‘hh:mm’
using the 24 hour clock format.
Press to save the new setting, or
Press to exit without saving.
PROGRAM MODE
Code:
enter Master User Access Code and press ENTER
7. SPECTRA
LIGHTING SETUP
press ENTER
Enter (1-20 mins) stop: HH:MMstop: HH:MM
enter time
press ENTER
enter time
press ENTER
enter time
press ENTER
7.1 Lamp On Time
xx minutes
7.4 Start Time
HH:MM
7.3 Stop Time
HH:MM
press ENTER press ENTER press ENTER
off
24-hour
Time-Controlled
select menu item
press ENTER
7.2 Lamp On Time
xxxxxxxxxxxxxx
press ENTER
ENTER
ENTER
ESC
ENTER
ENTER
ESC
ENTER
ESC
ENTER
ENTER
ENTER
ESC
ENTER
ESC
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Comentarios a estos manuales

Sin comentarios