Response SL5 Instrucciones de operaciones descargar pdf (Pagina 26)

PROGRAMMING

24 SA5

Telephone Application Setup

If using any of the telephone based functionality,

(e.g. answer-phone voice dialler, remote phone access

& control etc) the dial method must be set according to

the exchange type, (i.e. Pulse or Tone/DTMF).

Voice Dialler

set Dial method

set Dial mode = “Voice Dialler”

set Voice Dialler Phone Numbers

set Dial Sequence

record Alarm Messages

set Call Attempts

Remote Manager

set Dial Method

set Dial Mode = “Remote Manager”

set Remote Manager Phone Numbers

set System ID Code

set Call Attempts

Answer-Phone

set Dial Method

set Rings to Answer Phone

set Answer Phone Status = ON

Record Greeting Message

Latch Key

set Dial Method

set Latch-Key Status =

“ON” or “Selected-Users”

enable users if selected users

set Latch-Key Phone Numbers

Record User ID Message(s)

USER SETUP

This menu allows the 4 digit user access codes to be

configured for each User. The general users (1-6) may

also record a 4s message to be used with the “Latch-

Key” feature.

Scroll through the top level programming menu until

’1. USER SETUP’ is displayed and press .

Note: After configuring all required users press to

return to the top level of programming menu.

USERS 1-6

Default setting: not programmed

Scroll through the menu until the required User

‘USER _ SETUP’ is displayed and press .

User Access Code

Scroll through the menu until ‘:1 Access Code’

(and the current setting) is displayed.

To change the setting press .

Enter the new 4 digit Access Code and then

Press to save and exit, or

Press to exit without saving.

Record User Latch-Key Message

This enables each User to record a short 4s

message for use with the Latch Key facility. e.g.

“system disarmed by User-1”.

Scroll through the menu until ‘:2 Record User

Message’ is displayed.

To record a new message press .

Press to start the voice recorder

Press to exit without changing.

ENTER

ESC

User 2 User 3 User 4 User 5 User 6

:1 Access Code

xxxx

Enter Access

Code:

:2 Record

User Message

:3 Replay

User Message

1-1 USER 1 SETUP

:1 Access Code

xxxx

1-7 MASTER USER

SETUP

PROGRAM MODE

Code:

Start. . .

YES->1 NO->3

1. USER SETUP

Enter Access

Code:

see SYSTEM

SETUP Menu

see VOICE

DIALLER

SETUP menu

see SYSTEM

SETUP Menu

see SYSTEM

SETUP Menu

see SYSTEM

SETUP Menu

see

LATCH-KEY

SETUP Menu

see ANSWER

PHONE

SETUP menu

see REMOTE

MANAGER

SETUP menu

see USER

SETUP Menu

Note: For the Latch-Key feature to operate

correctly the “Dial Method” (see system setup)

and the items within the Latch-Key Setup menu

must be correctly set and programmed.

When recording, press to stop

the recorder and cancel any remaining

recording time. The new message will

then be replayed.

ESC

ENTER

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comentarios a estos manuales

Sin comentarios

Response SL5 Instrucciones de operaciones Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Response SL5